Products

OM100 - Electronic Temperature Control Devices Electronic Temperature Control Devices

GENERAL
A) The electric feed is on made on the device.
B) They control the temperature with 1 ⁰C degree of precision.
C) Because we programmed them with PIC, we can run the systems in a certain logic.
D) For the temperature measurement under 100 ⁰C , because of the characteristics of the sensor we use, we use shielded sensor wiring between the device and the point of measurement.
E) Some our products are manufactured with the variants, running with K type thermocouples for the temperature control requirements of 100C or above..
F) As the result of the use of semi conductors, you can make millions of switch on-off without the risk of short circuit.
G) The sytems consist of a wide array of devices that can answer to any need.
H) It can measure the temperatures of different points and evaluate the data according to a certain logic.
I) A lower minimum and upper maximum temperature limit is programmed to our heating systems for safety reasons.
J) Any intended temperature is entered as default.
K) It is possible to change the operation temperature. If desired, you can change the default temperature value too.
L) In order to prevent interventions, the devices come with a keypad lock.
M) The specially manufactured devices are made according to the order. They are not covered in this section.
 
The explanations, instruction manuals and programming animations are detailed on the side.

PACKING
Box

APPLICATIONS
This device is suitable for use with the our CWC heating cables
 
OM100 can control the heaters in real-time up to 2650 Watt between the temperatures
0 to 100⁰C.
CHARACTERISTICS
  • MODEL : OM100
  • 2650Watt
  • ELECTRONIC TEMPERATURE CONTROL DEVİCE
  • DATE of PRODUCTION : 2012
  • FEED CURRENT : 220 Volt
  • OUTPUT POWER: 2000 Watt

 


Electrical
FEED CURRENT : 220 Volt OUTPUT POWER: 2000 Watt

OM100 - Electronic Temperature Control Devices